General Shop Tool Locker With Tools - 60"
Brand : Paxton Patterson
- SKU:
- 62-0062
- MPN:
- NONE
- Maple tool cabinets constructed of solid maple and maple veneers
- Cabinet is built with 1” thick plywood sides and 1⁄4” plywood back for strength and durability
- Top portion of the cabinet, including the locking doors, is lined with 1⁄4” pegboard; the unit includes the appropriate hook assortment
- Bottom portion of the cabinet, including locking doors, contains three adjustable shelves and one fixed bottom for storing large items or tote trays that are included with the cabinet
- Overall dimensions: 60”W x 22”D x 84”H
- Tool cabinet is shipped assembled, tools shipped separately
Accommodated by hangers and hooks in upper cabinet
Quantity and tools included
- 10 Awl, Scratch, Asst.
- 25 Blade, Coping Saw, Pin End, pk/4
- 40 Blade, Hack Saw, 10”L
- 3 Caliper, Inside 6”-8”
- 3 Caliper, Outside 6”-8”
- 5 Chisel, Cold, Asst.
- 6 Chisel, Wood, Asst.
- 5 Clamp, Bar, 24”
- 10 Clamp, C, Asst.
- 6 Clamp, Handscrew, Asst.
- 1 Countersink, 3⁄4” Diameter
- 2 Divider, 6”L, 6-3⁄8” Opening
- 6 Drill & Countersink, Asst.
- 1 Drill Bit, HSS, 1⁄16”-1⁄2”, 29 pc.
- 2 Drill, Hand, 9-1⁄4”L, 1⁄4” Cap
- 1 Hex Key Set, Fractional, 18 pc.
- 27 File Handle, #6
- 6 File, Card & Brush Cleaner, 10”L
- 4 File, Flat, 10”L, Asst.
- 5 File, Half Round, 10”L, Asst.
- 6 File, Mill, 10”L, Asst.
- 4 File, Round, 10”L, Asst.
- 1 File, Square, Bastard Cut, 10”L
- 1 File, Three Square, Bastard Cut, 10”L
- 3 Gauge, Center, 60°
- 2 Gauge, Marking, Adjustable, 6”
- 1 Gauge, Tap & Drill
- 8 Hammer, Ball Pein, Asst.
- 8 Hammer, Curved Claw, 16 oz.
- 1 Level, Aluminum, 24”
- 2 Mallet, Rubber, 32 oz.
- 2 Micrometer, Outside, 0-1” and 1-2”
- 10 Nail Sets, Assorted
- 1 Oiler, Flexible Spout, 16 oz.
- 2 Plane, Block, 1-3⁄8” Cut
- 2 Plane, Jack, 14”
- 2 Plane, Smooth, 2” Cut
- 2 Pliers, Slip Joint, 6”L
- 4 Punch, Center, 3⁄32”-5⁄32
- 6 Rasp, Wood, 10”L, Asst.
- 4 Rivet, Sets, Asst.
- 14 Rule, Steel, Asst.
- 2 Saw, Back, 14”L
- 1 Saw, Compass, 12”L
- 8 Saw, Coping, Pin End, 6-1⁄2” L
- 3 Saw, Hack, Adjustable
- 8 Saw, Hand, 20”L
- 12 Screwdriver, Phillips Tip, Asst.
- 18 Screwdriver, Standard Tip, Asst.
- 1 Seamer, Hand, 8-3⁄4” OAL
- 2 Snips, Aviation, 9-3⁄4”L
- 3 Snips, Pattern, Straight, 11”L
- 1 Soldering, Iron, 200 Watt
- 1 Square, Aluminum, 24”L
- 1 Square, w/Protractor Head, 12”L
- 6 Square, Try, Stainless, 8” Blade
- 1 Stone, Bench, Coarse & Fine
- 1 Tap & Die, SAE 41 pc.
- 2 Tape Rule, 1⁄2” x 12’
- 4 T-Bevel, Sliding, 10”
- 1 V-Blocks & Clamp Set, 1-1⁄4” Cap.
- 4 Wrench, Adjustable, Asst.
- 4 Wrench, Pipe, 8”-18”, Asst.